TM 9-2320-302-34
0012 00-1
REAR ENGINE MOUNTS REPLACEMENT
0012 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Trestles (Item 135, WP 0126 00)
Personnel Required
Two
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
REMOVAL
1.
On left side, remove two nuts (1), washers (2), screws (3), and washers (4) from rear engine mount (5).
2.
On right side, remove nut (6), clamp (7), screw (8), washer (9), and clamp (10) from bracket (11).
3.
On right side, remove two nuts (12), washers (13), screws (14), bracket (11), and washer (15) from rear engine mount
(5).
3
4
5
2
1
8
9
10
14
11
7
6
14
15
5
12
13
LEFT SIDE
RIGHT SIDE
