TM 9-2320-302-34
0012 00-2
REAR ENGINE MOUNTS REPLACEMENT - CONTINUED
0012 00
REMOVAL - CONTINUED
WARNING
Engine weighs 2850 lb (1294 kg). Use hoist with lifting capacity of 5000 lb (2270 kg) to lift and support
engine. Failure to do so could result in injury to personnel.
CAUTION
Lift engine only enough to take weight off engine mounts. If engine is lifted too far, wiring harness may be
crushed by crossmember.
4.
Using suitable lifting device, lift engine (16) slightly.
NOTE
Steps 5 through 8 are for left side.
5.
Remove two screws (17), two washers (18), two screws (19), and rear engine leg (20) from flywheel housing (21).
6.
Remove two washers (22) and two isolators (23) from rear engine mount (5).
WARNING
Cab weighs 1100 lb (499 kg). Use suitable jack stands to support cab. Failure to do so could result in serious
injury to personnel.
7.
Using suitable jack stands, support cab at cab mounts (24) as close to frame rail (25) as possible.
3
4
18
17
19
22
23
26
27
5
2
1
25
29
29
28
8
9
10
14
11
7
6
14
15
18
17
19
29
28
29
25
5
12
13
27
26
23
22
20
16
21
LEFT SIDE
RIGHT SIDE
