TM 9-2320-302-34
0089 00-2
STEERING GEAR REPAIR - CONTINUED
0089 00
DISASSEMBLY
1.
Place steering gear assembly (1) in vise.
2.
Using 19 mm deep socket, rotate input shaft (2) until timing marks on sector shaft (3) and housing (4) line up.
3.
Remove and discard seal (5) from housing (4).
4.
Remove any paint or corrosion from sector shaft (3).
5.
Cover spined end of sector shaft (3) with masking tape (6).
6.
Remove nut (7), six screws (8), side cover (9), sector shaft (3), and gasket (10) from housing (4). Discard gasket.
2
3
4
5
1
TIMING
MARKS
6
3
