TM 9-2320-302-34
0088 00-2
STEERING GEAR REPLACEMENT - CONTINUED
0088 00
REMOVAL - CONTINUED
NOTE
Note orientation of hose fittings prior to removal aid in installation.
3.
Remove tee (4) and elbow (5) from steering gear (2).
4.
Remove screw (6) and lock washer (7). Discard lock washer.
5.
While an assistant supports steering gear (2), remove two screws (8), nuts (9), four washers (10), and steering gear.
INSTALLATION
1.
Install elbow (5) and tee (6) and orient as noted in removal.
2.
With assistance, position steering gear (2) and install two screws (8), four washers (10), and two nuts (9). Tighten nuts to
34-47 lb-ft (47-63 Nm).
3.
Install new lock washer (7) and screw (6).
4.
Connect two hoses (3) to tee (4) and elbow (5).
5.
Connect lower end of universal steering shaft (TM 9-2320-302-20).
6.
Install drag link (TM 9-2320-302-20).
7.
Install drain plug (1) in steering gear (2).
8.
Fill power steering reservoir (TM 9-2320-302-20).
9.
Check system for operation and leaks.
END OF WORK PACKAGE
9
10
3
5
10
8
10
8
2
9
10
3
4
7
1
6
