TM 9-2320-302-34
0089 00-4
STEERING GEAR REPAIR - CONTINUED
0089 00
DISASSEMBLY - CONTINUED
NOTE
Remove adjusting screw to install temporary screw to pry against during bearing removal.
8.
Install 1/2-20 UNF 2 X 3 in screw in adjusting screw hole (12) in side cover (9).
CAUTION
Use care when removing seal to prevent damage to side cover bushing.
9.
Remove and discard seal (13) from side cover (9).
10.
Remove temporary screw and replace with adjusting screw (11).
11.
Remove vent plug (14) from side cover (9).
NOTE
If adjusting screw or retainer are damaged, perform steps 12 and 13.
12.
Place sector shaft (3) in soft-jawed vise.
13.
Unstake, remove, and discard retainer (15) and adjusting screw (11).
13
9
14
9
13
11
12
15
11
3
