TM 9-2320-302-34
0080 00-15
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0080 00
ASSEMBLY
WARNING
Forward-rear axle differential carrier weighs 1160 lb (526 kg). Attach suitable lifting device when lifting
assembly to prevent possible injury to personnel
NOTE
•
If installing new ring gear and drive pinion, perform steps 1 through 6.
•
Replace ring gear and drive pinion as matched set. Gear set match number is on head of drive pinion
and front face or outer diameter of ring gear.
•
Pinion cone variation number is used to adjust depth of pinion in differential carrier. Pinion cone varia-
tion number is on end of gear head of drive pinion or outer diameter of ring gear.
1.
Record new pinion cone variation number.
2.
Record old pinion cone variation number.
3.
If old pinion cone variation number is +, subtract number from shim pack thickness in disassembly step 48.
4.
If old pinion cone variation number is -, add number to shim pack thickness in disassembly step 48.
5.
If new pinion cone variation number is +, add number to shim pack thickness determined in step 3 or 4.
6.
If new pinion cone variation number is -, subtract number from shim pack thickness determined in step 3 or 4.
NOTE
Coat all bearing cones and bearing cups with axle oil prior to installation.
7.
Using press, install inner bearing cone (60) on drive pinion (3) until bottom of inner bearing cone touches bottom of
drive pinion.
60
3
