TM 9-2320-302-34
0080 00-10
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0080 00
DISASSEMBLY - CONTINUED
33.
Rotate differential carrier (1) until ring gear (2) faces up.
34.
Matchmark position of two bearing caps (44 and 45) on differential carrier (1).
35.
Remove pin (46) from two bearing caps (44 and 45).
36.
Loosen four cap screws (47).
CAUTION
To prevent damage to adjusting rings, do not hit adjusting rings with hammer or use hammer and drift pin to
loosen rings.
37.
Loosen two adjusting rings (48).
38.
Remove four cap screws (47), washers (49), two bearing caps (44 and 45), and two adjusting rings (48).
39.
Using suitable lifting device, remove ring gear subassembly (50) and two bearing cups (51).
2
MATCHMARKS
46
48
1
44
45,46,47,48,49
47,49
50
51
51
