TM 9-2320-302-34
0071 00-18
TRANSMISSION OVERHAUL - CONTINUED
0071 00
MODULE OVERHAUL - CONTINUED
Front Support and Charging Oil Pump Module Disassembly - Continued
5.
Measure gear cavity diameter of pump housing (4). Maximum depth allowed is 5.915 in (150.25 mm).
6.
Install gear set (5) into pump housing (4). Measure pump gear side clearance of both gears. Maximum allowable clear-
ance is 0.004 in (0.10 mm).
4
MAX ID OF
GEAR CAVITY
150.25 mm (5.915 in)
4
5
DRIVE
GEAR
DRIVEN GEAR
MAX SIDE
CLEARANCE
0.10 mm (0.004 in)
