TM 9-2320-302-34
0070 00-2
TRANSMISSION REPLACEMENT - CONTINUED
0070 00
REMOVAL
1.
Remove access plug (1) and drain plug (2) from engine flywheel housing (3).
WARNING
Do not place finger in hole of engine flywheel housing while engine is being barred over. Failure to follow
this warning could result in injury.
CAUTION
Step 2 must be followed in barring engine over. Any other method may damage engine.
If bolts are dropped in engine flywheel housing, retrieve immediately. Failure to do so could result in
damage to equipment.
2.
Have an assistant bar engine (4) over using accessory drive (5). Locate and remove bolt (6) through hole in engine fly-
wheel housing (3). Repeat until 12 bolts have been removed.
1
3
2
4
6
5
3