TM 9-2320-302-34
0070 00-4
TRANSMISSION REPLACEMENT - CONTINUED
0070 00
INSTALLATION
WARNING
•
Transmission weighs 900 lb (409 kg). Always support transmission with transmission lift during instal-
lation to prevent injury to personnel.
•
Ensure transmission is properly positioned and secure on transmission lift, to prevent injury to person-
nel or damage to equipment.
1.
With assistance, move transmission under vehicle and directly behind engine.
CAUTION
Transmission must be seated squarely against engine flywheel housing to prevent damage to equipment.
2.
Lift and position transmission against engine flywheel housing (3).
3.
Install 12 new lock washers (11) and bolts (10) to secure transmission to engine flywheel housing (3). Hand tighten
bolts.
4.
Tighten four transmission mounting bolts 90 degrees apart to 40 lb-ft (54 Nm).
5.
Tighten remaining transmission mounting bolts to 40 lb-ft (54 Nm).
6.
Install rear support spring (9) on rear of transmission and frame supports with two washers (8) and bolts (7).
7.
Remove transmission lift.
3
10,11
9
7
8
