TM 9-2320-302-34
0052 00-2
ALTERNATOR REPAIR - CONTINUED
0052 00
DISASSEMBLY
1.
Remove fan (1), woodruff key (2), and spacer (3).
2.
Remove two nuts (4), lock washers (5), guard washers (6), cover (7), gasket (8), and two jumpers (9). Discard gasket
and lock washers.
3.
Remove two brushes (10).
4.
Remove four screws (11), brush holder (12), and seal (13). Discard seal.
5.
Remove two nuts (14), lock washers (15), nuts (16), lock washers (17), and two terminal studs (18). Discard lock wash-
ers.
6.
Remove three lock nuts (19) and screws (20). Discard lock nuts.
CAUTION
If drive end housing binds, tap gently on mounting ears. Ensure drive end housing separates from stator and
stator remains attached to slip ring end housing to avoid damage to stator leads.
7.
Remove rotor and drive end housing (21) from stator (22) and slip ring end housing (23).
8.
Remove and discard three tenz nuts (24). Disconnect three leads (25) and remove stator (22).
7
6
5
4
9
9
8
18
18
10
10
17
16
15
14
3
1
2
13
11
14
15
16
17
12
