TM 9-2320-302-34
0051 00-8
SPINDLE AND HOUSING REPAIR - CONTINUED
0051 00
ASSEMBLY - CONTINUED
NOTE
Ensure snap ring is fully seated in groove of spindle housing.
12.
Install ball bearing retaining snap ring (10) in spindle housing (5).
NOTE
Do not pack spindle housing more than 2/3 full.
13.
Pack spindle housing (5) with grease.
14.
Support fan spindle (1) on press bed and carefully install spindle housing (5) on fan spindle.
15.
Using narrow end of installing tool (18), press ball bearing assembly (12) inner race on fan spindle (1) until ball bearing
assembly inner race is firmly seated against shoulder of fan spindle.
10
5
18
12
5
1
