TM 9-2320-302-34
0051 00-9
SPINDLE AND HOUSING REPAIR - CONTINUED
0051 00
ASSEMBLY - CONTINUED
16.
Secure fan spindle (1) in vise. Install spacer (4) and spacer retaining bolt (3) in spindle housing (5). Tighten bolt to 43-
54 lb-ft (58-73 Nm).
17.
Coat edge of new cup plug (2) with adhesive. Using flat side of bearing inserter and remover tool (11), press new cup
plug in spindle housing (5) until raised center of cup plug is flush with edge of spindle housing.
18.
Install lube pressure relief fitting (16) and grease fittings (15). Tighten to 72 lb-in (8 Nm) minimum.
19.
Install spindle and housing (TM 9-2320-302-20).
END OF WORK PACKAGE
11
2
3
4
15
5
16
1