TM 9-2320-302-34
0043 00-2
TURBOCHARGER REPAIR - CONTINUED
0043 00
DISASSEMBLY - CONTINUED
CAUTION
Tilting or cocking turbine housing during disassembly could damage turbine wheel blades.
2.
Loosen coupling nut (4) and remove clamp (5) and turbine housing (3) from center housing (2).
3.
Loosen coupling nut (6).
4.
Remove compressor housing (1) and clamp (7) from center housing (2). If necessary, loosen compressor housing by tap-
ping with soft mallet.
ASSEMBLY
1.
Slide clamp (7) over backplate (8).
2.
Position compressor housing (1), as marked in disassembly, against backplate (8). Secure with clamp (7). Lubricate
threads of clamp lightly with engine lubricating oil and tighten coupling nut (6) to 110-130 lb-in (12-15 Nm).
CAUTION
Ensure coupling nuts are tightened enough to prevent turbine housing from contacting turbine wheel.
3.
Position turbine housing (3), as marked in disassembly, against center housing (2). Coat threads of clamp (5) with anti-
seize compound. Install clamp and tighten coupling nut (4) to 110-130 lb-in (12-15 Nm).
4.
Attach dial indicator (9) to turbine housing (3) so that dial indicator plunger (10) rests on hub end of turbine wheel
assembly.
5.
Set dial indicator (9) for reading of zero.
3
5
2
8
7
1
6
4
