TM 9-2320-302-34
0042 00-4
TURBOCHARGER REPLACEMENT
0042 00
INSTALLATION - CONTINUED
5.
Install new gasket (9) and connect oil drain line (8) to bottom of turbocharger (3) with two bolts (7). Tighten bolts to 22-
28 lb-ft (30-38 Nm).
CAUTION
Do not use lubricant on inside of air inlet hose or hose contact surfaces of turbocharger compressor housing,
intercooler, intercooler ducting or intake manifold. Use of lubricant can cause hose to blow off turbocharger.
Failure to lubricate turbocharger will result in premature failure.
6.
Pour approximately half-pint of engine lubricating oil into turbocharger (3) through oil inlet port fitting (2) at top of tur-
bocharger (3), while manually rotating compressor wheel.
7.
Connect oil supply line (1) to oil inlet port fitting (2). Wipe spilled oil from turbocharger (3) and exhaust manifold.
8.
Install oil supply line clip (6) on oil filter adapter and secure with top mounting bolt (4) and washer (5). Tighten bolt to
43-54 lb-ft (58-73 Nm).
9.
Install air intake tubes and hoses (TM 9-2320-302-20).
10.
Install exhaust pipes (TM 9-2320-302-20).
END OF WORK PACKAGE
6
5
4
8
7
9
3
2
1
