TM 9-2320-302-34
0042 00-1
TURBOCHARGER REPLACEMENT
0042 00
THIS WORK PACKAGE COVERS
Removal, Inspection, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Adapter, torque wrench (Item 3, WP 0126 00)
Shield, turbo protect (Item 113, WP 0126 00)
Wrench, torque, 15-75 lb-ft (Item 139, WP 0126 00)
Materials/Parts
Gasket, drain tube (P/N 8929285)
Gasket, exhaust inlet (P/N 8929529)
Materials/Parts - Continued
Oil, lubricating (Item 25, WP 0125 00)
Tape, masking (Item 37, WP 0125 00)
Personnel Required
Two
Equipment Condition
Exhaust pipes removed from turbocharger (TM 9-
2320-302-20)
Air intake tubes and hoses removed from turbocharger
(TM 9-2320-302-20)
REMOVAL
WARNING
Hot turbocharger and exhaust pipe can cause serious burns. Do not work on exhaust system until it is cool.
To do so could result in serious injury to personnel.
NOTE
If removal of wastegate actuator is required, refer to WP 0044 00 for 3K turbochargers. Refer to WP 0045 00
for Garrett turbochargers. Wastegate removal is not required to remove turbocharger.
