TM 9-2320-302-34
0034 00-5
CAMSHAFT DRIVE GEAR MAINTENANCE - CONTINUED
0034 00
INSTALLATION
1.
Lubricate new camshaft thrust plate seal ring (4) with clean engine lubricating oil. Install seal ring on thrust plate (6).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
CAUTION
Apply adhesive on racetrack-shaped seal only, not on face of thrust plate. Failure to do so could result in
damage to equipment.
2.
Apply a thin coat of adhesive on one side of new racetrack-shaped seal (5). Install seal on engine side of thrust plate (6).
3.
Install camshaft drive gear assembly (3) in gear housing opening (10).
3
6
5
4
10
