TM 9-2320-302-34
0035 00-2
GEAR HOUSING ASSEMBLY REPLACEMENT - CONTINUED
0035 00
REMOVAL
1.
Remove bolt (1) and washer (2) from adjustable idler gear oil supply hole. Discard washer.
2.
Remove bolt (3) and washer (4) from adjustable idler gear holding access hole. Discard washer.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
3.
Using suitable lifting device and 1/2 in nylon rope through camshaft thrust plate opening, support gear housing assem-
bly (5) and remove 12 bolts (6).
1
2
3
4
5
6
6
6
6
6
6
