TM 9-2320-302-34
0034 00-6
CAMSHAFT DRIVE GEAR MAINTENANCE - CONTINUED
0034 00
INSTALLATION - CONTINUED
4.
Ensure that dimple (11) on rear face of thrust plate (6) is positioned at 12 o’clock. If necessary, tap camshaft drive gear
hub toward engine with fiber or plastic mallet until rear face of thrust plate is 1/4 in (6.35 mm) from face of cylinder
head (12). Ensure that thrust plate is not tilted in bore.
5.
Install camshaft and bearings (WP 0026 00).
6.
Install bull/idler gear (WP 0037 00).
END OF WORK PACKAGE
11
12
6
1/4 in (6.35 mm)
