TM 9-2320-302-34
0026 00-6
CAMSHAFT AND BEARINGS REPLACEMENT - CONTINUED
0026 00
REMOVAL - CONTINUED
12.
Remove four camshaft cap bolts (20).
13.
Using rocker stud socket, remove two rocker shaft studs (21) and seals (22) from camshaft bearing caps (23) no. 1 and
no. 7. Discard seals.
CAUTION
Camshaft bearing caps are numbered and must be kept in sequence and reinstalled in original positions to
prevent damage to equipment. Camshaft bearing caps cannot be interchanged or transferred to another cylin-
der head.
NOTE
If camshaft bearing shells are to be reused, tag all parts. Shell must be kept with same camshaft bearing cap.
14.
Remove seven camshaft bearing caps (23) and seven upper camshaft bearing shells (24) together as units.
15.
Remove and discard racetrack seal ring (25) between camshaft bearing cap (23) no. 1 (front) and seal ring between cam-
shaft bearing cap (23) no. 7 (rear) and cylinder head (26).
Cap no. 7
25
24
23
22
20
20
20
20
21
23
23
23
22
Cap no. 1
23
25
24
24
26
21
