TM 9-2320-302-34
0026 00-3
CAMSHAFT AND BEARINGS REPLACEMENT - CONTINUED
0026 00
REMOVAL - CONTINUED
NOTE
After inserting shoe of retaining plate through access hole of camshaft drive gear, it may be necessary to bar
engine over slightly to align bolt holes in retaining plate with bolt holes in drive gear access cover. If neces-
sary, bar engine using accessory drive pulley retaining nut to align access hole.
6.
Install retaining plate (6) on gear housing (7) engaging one access hole (8) in camshaft drive gear (9). Install two bolts
(10) in retaining plate (6) and gear housing (7).
7.
Remove camshaft drive gear bolt (11). Discard bolt
8.
Remove two bolts (10) and retaining plate (6) from gear housing (7).
8
9
11
7
6
10
10
