TM 9-2320-302-34
0025 00-5
FLEX PLATE MAINTENANCE - CONTINUED
0025 00
INSTALLATION
NOTE
Ensure mating surfaces of crankshaft butt and flex plate assembly are clean and dry.
1.
Install flex plate assembly (8) on two guides studs (6) and slide forward against crankshaft butt.
2.
Install new scuff plate (7) on two guide studs (6) and slide forward against flex plate assembly (8).
NOTE
Do not apply international compound no. 2 on underside of bolt heads.
3.
Apply international compound no. 2 on threads of 10 bolts (5).
4.
Install ten bolts (5) through scuff plate (7) and flex plate assembly (8). Tighten bolts to 50 lb-ft (68 Nm).
5.
Remove two guide studs (6) and install remaining two bolts (5). Tighten bolts to 50 lb-ft (68 Nm).
6
8
6
5
5
7
4
6
8
