DDEC TROUBLESHOOTING
8.5
SPLICING GUIDELINES
The following are guidelines which may be used for splices. The methods described are not the
only acceptable methods. Any method should produce a high quality, tight splice with durable
insulation which can be expected to last the life of the vehicle.
The selection of crimpers and splice connectors is optional. Select a high quality crimper
equivalent to the Kent-Moore tool, J 38706, and commercially available splice clips.
8.5.1
Tools Required
The following is a list of tools required for splicing wires:
Soldering iron
Rosin core solder
Wire strippers
Heat shrink tubing
Splice clips
Crimp pliers
All information subject to change without notice.
6SE497 9709 Copyright © 1997 DETROIT DIESEL CORPORATION
8-23
