8.4
DEUTSCH CONNECTORS
8.4
DEUTSCH CONNECTORS
Deutsch connectors have cable seals molded into the connector. These connectors are push to
seat connectors with cylindrical terminals. The diagnostic connector terminals are gold plated for
clarity. Deutsch connectors and their associated part numbers are listed in Table 8-5.
Diagnostic Connector
Connector
P/N: 23513052
Terminal
P/N: 23513053
Protective Cap
P/N: 23413054
Plug
P/N: 23507136
Engine Minder
Connector
P/N: 23512222
Terminal
P/N: 23507132
Plug
P/N: 23507136
Mastermind - Power and Communication Link
Connector
P/N: 23512221
Terminal
P/N: 23507132
Plug
P/N: 23507136
Mastermind - Inputs and Outputs
Connector
P/N: 23512223
Terminal
P/N: 23507066
Plug
P/N: 23507136
Table 8-5
Deutsch Connectors and Part Numbers
8.4.1
Installation
Use the following instructions for installation:
1. Strip approximately14 in.(6 mm) of insulation from the cable.
2. Remove the lock clip, raise the wire gage selector, and rotate the knob to the number
matching the gage wire that is being used.
3. Lower the selector and insert the lock clip.
All information subject to change without notice.
8-18
6SE497 9709 Copyright © 1997 DETROIT DIESEL CORPORATION
