TM 9-2320-302-20
0189 00-2
HOOD LINER REPLACEMENT - CONTINUED
0189 00
INSTALLATION
1.
Install inner fender (14) to hood (6) with 10 washers (13) and screws (12).
NOTE
Use double-sided tape to hold liners in place. Rivets are replaced with self-tapping screws. Rivets with back-
ing washers are replaced with screws and lock nuts.
2.
Install side liners (3) on hood (6) with five new screws (9), washers (10 and 11), eight new washers (8), and new lock
nuts (7).
3.
Repeat steps 1 and 2 for liners and inner fenders on opposite side.
4.
Install two top liners (2) on hood (6) with three support straps (5) and six new self-tapping screws (4).
5.
Install duct tape (1) on each seam between two top liners (2) and side liners (3).
6.
Install engine assembly hood assembly (WP 0185 00).
END OF WORK PACKAGE
11
6
13
12
1
2
6
2
5
4
7
8
9
10
3
14
