TM 9-2320-302-20
0189 00-1
HOOD LINER REPLACEMENT
0189 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Drill, electric, portable (Item 11, WP 0236 00)
Drill set, twist (Item 12, WP 0236 00)
Materials/Parts
Nut, lock (P/N MS51922-1) (26)
Screw, 1/4-20x1 in (10)
Materials/Parts - Continued
Screw, self-tapping, 1/4-20x3/4 in (6)
Washer, flat 1/4 in (10)
Tape, double-sided (Item 32, WP 0235 00)
Tape, duct (Item 33, WP 0235 00)
Equipment Condition
Engine hood assembly removed (WP 0185 00)
REMOVAL
1.
Cut or remove duct tape (1) between two top liners (2) and side liners (3).
2.
Remove six rivets (4), three support straps (5), and two top liners (2) from hood (6). Discard rivets.
3.
Remove eight lock nuts (7), washers (8), five rivets (9), washers (10 and 11), and side liners (3) from hood (6). Discard
lock nuts, washers, and rivets.
4.
Remove 10 screws (12), washers (13), and inner fender (14) from hood (6).
5.
Repeat steps 3 and 4 for liner and inner fender on opposite side.
11
6
13
12
1
2
6
2
5
4
7
8
9
10
3
14
