TM 9-2320-302-20
0165 00-1
FRONT HUB, DRUM, WHEEL BEARINGS, AND SEAL REPLACEMENT
0165 00
THIS WORK PACKAGE COVERS
Removal, Installation, Adjustment (End Play)
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Handle, installer (Item 15, WP 0236 00)
Indicator, dial (Item 18, WP 0236 00)
Installation tool, ABS tone ring (Item 19, WP
0236 00)
Pan, drain (Item 25, WP 0236 00)
Wrench, torque, 0-300 lb-in (Item 44, WP 0236 00)
Wrench, torque, 15-75 lb-ft (Item 45, WP 0236 00)
Wrench, torque, 50-250 lb-ft (Item 46, WP 0236 00)
Materials/Parts
Gasket (P/N 450755)
Seal, oil (P/N 35066)
Materials/Parts - Continued
Washer, lock (P/N 1229G475)
Washer, lock (P/N MS 35338-140) (6)
Oil, lubricating (Item 25, WP 0235 00)
References
TM 9-2320-302-10
Equipment Condition
Front wheel removed (TM 9-2320-302-10)
Front anti-lock brake system (ABS) sensor removed
(WP 0106 00)
NOTE
Front axle ABS tone ring replacement is covered in this work package.
REMOVAL
1.
Remove pressure relief screw, spring, and pawl assembly (1) from slack adjuster (2).
NOTE
Perform step 2 to obtain enough clearance between brake drum and brakeshoes to remove brake drum.
2.
Turn adjusting nut (3) counterclockwise.
1
2
3
