TM 9-2320-302-20
0164 00-1
FRONT AND DUAL REAR WHEEL LUG NUT INSTALLATION
0164 00
THIS WORK PACKAGE COVERS
Front Wheel Lug Nuts Installation, Rear Wheel Lug Nuts Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Wrench, torque, 0-600 lb-ft (Item 47, WP 0236 00)
Wrench set, socket, 3/4 in drive (Item 48, WP 0236 00)
FRONT WHEEL LUG NUTS INSTALLATION
WARNING
Whenever any lug nuts require tightening or a wheel has been removed and replaced, all lug nuts must be
tightened to the required torque. Failure to follow this warning may result in serious injury to personnel or
damage to equipment.
NOTE
•
Tightening pattern is the same for all wheel assemblies.
•
After operating vehicle for 50-100 miles (80 to 160 km), tighten lug nuts again.
1.
Install lug nut on each wheel stud and hand tighten until each lug nut is flush with face or chamfer of wheel.
2.
Rotate wheel half a turn to seat parts and hand tighten each wheel lug nut again.
3.
Tighten each lug nut to 50 lb-ft (68 Nm) in accordance with tightening pattern.
TIGHTENING PATTERN
