TM 9-2320-302-20
0162 00-2
FRONT ANTI-LOCK BRAKE SYSTEM (ABS) SOLENOID VALVE REPLACEMENT - CONTINUED
0162 00
REMOVAL - CONTINUED
2.
Disconnect three air lines (3) from ABS valve (2).
3.
Remove two screws (4), four washers (5), two nuts (6), and ABS valve (2) from bracket (7).
NOTE
Do not perform next step unless bracket is damaged.
4.
Remove two bolts (8), four washers (9), two nuts (10), and bracket (7) from frame (11).
INSTALLATION
NOTE
Do not perform next step unless bracket was removed.
1.
Position bracket (7) on frame (11) and install two bolts (8), four washers (9), and two nuts (10).
2.
Position ABS valve (2) on bracket (7) and install two screws (4), four washers (5), and two nuts (6).
3.
Connect three air lines (3) to ABS valve (2).
4.
Connect two electrical cables (1) to ABS valve (2).
5.
Start vehicle (TM 9-2320-302-10) to build air pressure and check for leaks.
END OF WORK PACKAGE
3
2
8
9
11
6
5
7
5
4
1
10
9
