TM 9-2320-302-20
0146 00-2
AIR SUPPLY TANK AND FITTINGS REPLACEMENT - CONTINUED
0146 00
REMOVAL - CONTINUED
NOTE
Perform steps 6 and 7 only if fittings or air tank are to be replaced.
6.
Remove five connectors (13), safety valve (14), elbow (15), two tees (16), bushing (17), check valve (18), tee (19), and
drain valve (20) from air supply tank (2).
7.
Remove two screws (21), washers (22), and mounting brackets (23) from air supply tank (2).
INSTALLATION
NOTE
Perform steps 1 through 3 only if fittings or air tank were replaced.
1.
Install two mounting brackets (23), washers (22), and screws (21) on air supply tank (2).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harm-
ful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesives or sealing compound gets on skin or clothing, wash immediately
with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not
enter air lines or fittings. Failure to follow this warning could result in injury to personnel or
damage to equipment.
19
13
15
13
16
14
17
18
2
23
22
21
13
20