TM 9-2320-302-20
0143 00-2
PRIMARY I AIR TANK AND FITTINGS REPLACEMENT - CONTINUED
0143 00
INSTALLATION
WARNING
•
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
•
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
NOTE
Perform steps 1 and 2 only if fittings or air tank were replaced.
1.
Lightly coat pipe threads of two plugs (11), drain valve (10), check valve (9) and two elbows (8) with pipe sealing com-
pound. Install plugs, drain valve, check valve, and elbows on air tank (2).
2.
Install air tank (2) to two mounting brackets (7) with two screws (6) and new lock nuts (5).
3.
Install air tank (2) with four washers (4) and new lock nuts (3).
4.
Connect two tubes (1) to air tank (2).
5.
Perform air system PMCS leak test (WP 0021 00).
6.
Install rear platform (WP 0200 00).
END OF WORK PACKAGE
4
3
3
7
6
6
5
5
2
11
8
9
1
1
8
10
11
4
