TM 9-2320-302-20
0141 00-2
FRONT AIR BRAKE CHAMBER REPLACEMENT - CONTINUED
0141 00
INSTALLATION
1.
Install brake chamber (2) on mounting bracket (10) with two washers (9) and nuts (8).
2.
Align brake chamber clevis (6) on slack adjuster (7) and install two clevis pins (5) and new cotter pins (4).
WARNING
•
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
•
Ensure that all air lines and fittings are clear of debris and excess pipe sealing compound does not enter
air lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
3.
Lightly coat threads of fitting (3) with pipe sealing compound. Install fitting on brake chamber (2).
4.
Connect air hose (1) to fitting (3).
5.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
END OF WORK PACKAGE
1
2
3
4
2
4
8,9
5
8,9
6
10
7
