TM 9-2320-302-20
0140 00-5
SLACK ADJUSTER AND S-CAM REPLACEMENT- CONTINUED
0140 00
FRONT SLACK ADJUSTER INSTALLATION - CONTINUED
13.
Install new cotter pins (2 and 1) on clevis pins (4 and 3).
14.
Install front brakeshoe (WP 0135 00).
REAR SLACK ADJUSTER INSTALLATION
1.
Lightly coat splines of s-cam (20) with antiseize compound.
2.
Install s-cam (20) and special washer (24) on mounting bracket (23).
3.
Install washer (22) and slack adjuster (21) on s-cam (20) with head of screw (3) toward vehicle.
NOTE
If repeating installation because measurement in step 11 exceeded 0.06 in (1.5 mm), add another washer as a
spacer.
4.
Install washers (19) and retaining ring (18) on s-cam (20).
1
4
3
2
24
23
20
18
19
21
22
30
