TM 9-2320-302-20
0140 00-2
SLACK ADJUSTER AND S-CAM REPLACEMENT - CONTINUED
0140 00
FRONT SLACK ADJUSTER REMOVAL - CONTINUED
NOTE
Note position of washers for installation.
2.
Remove retaining ring (6) and washers (7) from s-cam (8).
3.
Remove slack adjuster (9) and washer (10) from splined shaft of s-cam (8).
4.
Mark position of s-cam (8) on mounting bracket (11) and remove s-cam and special washer (12) from mounting bracket.
REAR SLACK ADJUSTER REMOVAL
1.
Remove cotter pins (13 and 14) and clevis pins (15 and 16) from rear brake chamber clevis (17). Discard cotter pins.
NOTE
Note position of washers for installation.
2.
Remove retaining ring (18) and washers (19) from s-cam (20).
3.
Remove slack adjuster (21) and washer (22) from splined shaft of s-cam (20).
4.
Mark position of s-cam (20) on mounting bracket (23) and remove s-cam and special washer (24) from mounting
bracket.
12
11
8
6
7
9
10
13
16
15
17
14
