TM 9-2320-302-20
0140 00-3
SLACK ADJUSTER AND S-CAM REPLACEMENT- CONTINUED
0140 00
REAR SLACK ADJUSTER REMOVAL - CONTINUED
FRONT SLACK ADJUSTER INSTALLATION
1.
Lightly coat splines of s-cam (8) with antiseize compound.
2.
Install s-cam (8) and special washer (12) on mounting bracket (11).
3.
Install washer (10) and slack adjuster (9) on s-cam (8) with head of screw (25) toward vehicle.
NOTE
If repeating installation because measurement in step 12 exceeded 0.06 in (1.5 mm), add another washer as a
spacer.
4.
Install washers (7) and retaining ring (6) on s-cam (8).
24
23
20
18
19
21
22
12
11
8
6
7
9
10
25
