TM 9-2320-302-20
0092 00-2
FUEL PRESSURE SENSOR REPLACEMENT - CONTINUED
0092 00
INSTALLATION
1.
Install mounting plate (12) on side of engine with two washers (14) and screws (13).
2.
Install fuel pressure sensor (2) on mounting plate (12) with two clamps (11), screws (8), washers (9), and new lock nuts
(10).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesives
or sealing compound contacts skin or clothing, wash immediately with soap and water.
CAUTION
Ensure that all fittings are clear of debris and excess pipe sealing compound does not enter fittings or fuel
lines. Failure to follow this caution could result in damage to equipment.
3.
Lightly coat threads of elbow (7) with pipe sealing compound. Install elbow and fuel hose (6) on fuel pressure sensor
(2).
4.
Lightly coat threads of elbow (5) with pipe sealing compound. Install elbow and fuel hose (4) on fuel pressure sensor
(2).
5.
Connect connector (1) to wiring harness (3).
END OF WORK PACKAGE
6
7
11
12
2
10
14
13
3
1
5
4
9
8
