TM 9-2320-302-20
0093 00-2
FUEL TEMPERATURE SENSOR REPLACEMENT - CONTINUED
0093 00
INSTALLATION
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesives
or sealing compound contacts skin or clothing, wash immediately with soap and water.
CAUTION
Ensure that all fittings are clear of debris and excess pipe sealing compound does not enter fittings or fuel
lines. Failure to follow this caution could result in damage to equipment.
1.
Lightly coat threads of fuel temperature sensor (2) with pipe sealing compound. Install fuel temperature sensor on elbow
(3).
2.
Connect engine wiring harness connector (1) to fuel temperature sensor (2).
END OF WORK PACKAGE
1
2
3