TM 9-2320-302-20
0084 00-2
BLACKOUT DRIVE, MARKER LIGHT, AND WIRING HARNESS REPLACEMENT - CONTINUED
0084 00
REMOVAL - CONTINUED
2.
Remove three lock nuts (2), washers (3), and clamp (4). Discard lock nuts.
NOTE
Quantity of wire tiedown straps may vary. Remove tiedown straps as needed and discard.
3.
Remove grommet (5) and pull harness (6) through fender while removing blackout light assembly (7) from fender.
4.
Remove two lock nuts (8), wire (9), marker light (10), and three screws (11). Discard lock nuts.
5.
Remove nut (12), lock washer (13), ground wire (14), and blackout drive light (15) from bracket (16). Discard lock
washer.
6.
Remove harness (6) from blackout drive light (15).
DISASSEMBLY
1.
Loosen three screws (17) and remove door (18) from enclosure (19).
NOTE
Tag wires to aid in installation.
2.
Remove lamp unit (20) from enclosure (19) and disconnect two wires (21). Remove shell (22).
3.
Remove washer (23), grommet (24), and adapter (25) from enclosure (19).
15
7
10
11
16
11
9
8
5
3
2
3
2
4
6
14
13
12
1
6
