TM 9-2320-302-20
0082 00-3
HEADLAMP ADJUSTMENT - CONTINUED
0082 00
ADJUSTMENT - CONTINUED
13.
With low-beam headlamps on, adjust each headlamp until highest intensity point is slightly to right and slightly below
headlamp centerlines +/- 4 in (+/- 10.2 cm). To adjust intensity point up or down, rotate center adjusting screw (3) left or
right. To adjust intensity point left or right, rotate side adjusting screw (4) left or right.
14.
With high-beam headlamps on, cover each low-beam headlamp with cardboard cut to 7.25 in x 5 in (18.4 cm x 13 cm).
15.
Adjust each headlamp until highest intensity point is over centerline mark +/- 4 in (+/- 10.2 cm). To adjust intensity
point up or down, rotate center adjusting screw (3) left or right. To adjust intensity point left or right, rotate side adjust-
ing screw (4) left or right.
END OF WORK PACKAGE
3
4
CARDBOARD
(7.25 IN x 5 IN)
