TM 9-2320-302-20
0083 00-3
HEADLAMP AND HEADLIGHT REPLACEMENT - CONTINUED
0083 00
HEADLIGHT INSTALLATION - CONTINUED
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesives
or sealing compound contacts skin or clothing, wash immediately with soap and water.
2.
Apply adhesive to mating surface of headlight assembly (16). Install headlight assembly on vehicle with eight screws
(17).
3.
Install clamp (15) and screw (14) on headlight assembly (16).
4.
Install clamp (12) on bracket (13) with washer (11), screw (10), and new lock nut (9).
5.
Connect connector (7) on wiring harness (8).
HEADLAMP INSTALLATION
NOTE
Procedure is the same for all headlamps.
1.
Install headlamp (6) on vehicle.
2.
Install headlamp retainer (5) on headlamp (6) and four screws (4).
3.
Position bezel (2) on vehicle and connect turn signal light (3).
4.
Install four screws (1) on bezel (2).
5.
Adjust headlamps (6) (WP 0082 00).
END OF WORK PACKAGE
6
4
5
4
5
6
3
2
1
