TM 9-2320-302-20
0046 00-1
FAN BELT REPLACEMENT AND ADJUSTMENT
0046 00
THIS WORK PACKAGE COVERS
Removal, Installation, Adjustment
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Tensiometer, dial indicating (Item 32, WP 0236 00)
Wrench, torque, 50-250 lb-ft (Item 46, WP 0236 00)
References
TM 9-2320-302-10
Equipment Condition
Fan impeller and shroud removed (WP 0047 00)
REMOVAL
1.
Loosen four screws (1) on spindle and housing (2).
2.
Loosen adjusting screw (3) and allow slack in three fan belts (4).
3.
Remove three fan belts (4) from vehicle.
INSTALLATION
NOTE
Fan belts should only be replaced in matched sets. DO NOT mix old and new fan belts.
1.
Position three fan belts (4) on vehicle.
4
2
3
1
1
