TM 9-2320-302-20
0049 00-1
FAN CLUTCH AND DRIVE PULLEY REPLACEMENT
0049 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
References
TM 9-2320-302-10
Equipment Condition
Fan impeller and shroud removed (WP 0047 00)
Fan belts removed (WP 0046 00)
Air system drained (TM 9-2320-302-10)
REMOVAL
1.
Disconnect air line (1) from spindle behind drive pulley (2).
WARNING
Compressed air used for cleaning or drying purposes, or for cleaning restrictions, should never exceed 30 psi
(207 kPa). Wear protective clothing (goggles/shield, gloves, etc.) and use caution to avoid injury to person-
nel.
NOTE
Perform step 2 if six screws of fan clutch are not accessible.
2.
Apply air pressure to fitting of spindle behind drive pulley (2) to access heads of six screws (3).
3.
Remove six screws (3), fan clutch (4), spacer (5), and drive pulley (2) from vehicle.
2
5
4
3
1
