TM 9-2320-302-20
0036 00-3
AIR CLEANER, AIR INTAKE DUCT, AND TURBO BYPASS VALVE MAINTENANCE - CONTINUED
0036 00
AIR CLEANER AND INTAKE DUCT DISASSEMBLY
Remove six lock nuts (21), washers (22), and air cleaner (3) from air intake duct assembly (17). Discard lock nuts.
AIR CLEANER AND INTAKE DUCT ASSEMBLY
CAUTION
Ensure air cleaner and air intake duct assembly have been thoroughly cleaned. DO NOT leave any dirt or
foreign matter inside air cleaner or air intake duct assembly. Dirt or other foreign matter may get into turbo-
charger or engine and cause damage to equipment.
Install air cleaner (3) on air intake duct assembly (17) with six washers (22) and new lock nuts (21).
AIR CLEANER AND INTAKE DUCT INSTALLATION
1.
Install air cleaner (3) and intake duct assembly (17) with four new lock nuts (18), washers (19), and screws (20). Torque
lock nuts to 25-35 lb-ft (33-47 Nm).
2.
Position hose clamps (14 and 16), hose (15), and tube assembly (10) on air intake duct assembly (17). Tighten hose
clamps.
3.
Install screw (11), washer (12), and new lock nut (13) on tube assembly (10).
4.
Install tube adapter (9) and tubing (8) on tube assembly (10).
5.
Position elbow (6) and hose clamps (4 and 5) on air cleaner (3) and air duct tube (7). Tighten hose clamps.
17
21
22
3
