TM 9-2320-302-20
0038 00-1
CHARGE AIR COOLER AND AIR RECIRCULATION SHIELD REPLACEMENT
0038 00
THIS WORK PACKAGE COVERS
Charge Air Cooler Removal, Air Recirculation Shield Removal, Air Recirculation Shield Installation, Charge Air Cooler
Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Materials/Parts
Nut, lock (P/N 23-11020-006) (4)
Personnel Required
Two
CHARGE AIR COOLER REMOVAL
1.
Remove two lock nuts (1), four washers (2), and two screws (3) from two side shields (4). Discard lock nuts.
2.
Loosen four clamps (5) and remove two hoses (6) from charge air cooler (7) and air intake tubes (8).
CAUTION
Secure charge air cooler in position before performing steps 3 and 4. Failure to follow this warning will
result in damage to equipment.
3.
Remove two lock nuts (9), screws (11), and washers (10) from charge air cooler (7). Discard lock nuts.
4.
Remove two nuts (12), washers (13), and charge air cooler (7) from radiator (14).
5
5
6
3
2
4
14
9
2
1
10
11
8
7
9
12
13
