TM 9-2320-302-20
0034 00-2
FUEL PUMP REPLACEMENT - CONTINUED
0034 00
REMOVAL - CONTINUED
6.
Remove elbow (7), adapter (8), tee (9), and bushing (10) from outlet port of fuel pump (6).
7.
Remove adapter (11) from inlet port of fuel pump (6).
8.
Remove three bolts (12) securing fuel pump (6) to air compressor (13).
9.
Remove fuel pump (6), drive coupling (14), and gasket (15). Discard gasket.
INSTALLATION
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
1.
Install adapter (11) in inlet port of fuel pump (6).
2.
Install bushing (10), tee (9), adapter (8), and elbow (7) in outlet port of fuel pump (6).
3.
Install elbow (5) to lubrication port of fuel pump (6).
4.
Install new gasket (15) and drive coupling (14) on fuel pump (6).
NOTE
Fuel pump is correctly oriented for mounting when outlet fitting is in approximately 8 o’clock position as
viewed from rear. Drain opening in pump body is facing down.
5.
Index drive coupling (14) with drive hub on end of air compressor (13) crankshaft and align fuel pump (6) mounting
holes with those in air compressor rear cover.
6.
Seat fuel pump (6) squarely against the air compressor (13) and secure in place with three bolts (12).
13
15
14
11
1
7
3
2
8
9
12
5
4
10
6
