TM 9-2320-273-20
STARTING AND STARTING CONTROL.
Discard gaskets (3)
and (5).
5-32. STARTER MOTOR MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
NOTE
Wrap rope around starter motor and first
mechanic holds rope while second mech-
anic performs steps 3, 4, 7, and 8.
3. Three bolts (1)
Remove.
and washers (2).
4. Starter motor (6).
Remove.
5. Gasket (3), spacer (4),
Remove.
and gasket (5).
B.
INSTALLATION.
6. New gasket (3), spacer (4),
Aline and install
and new gasket (5).
on starter motor (6).
7. Starter motor (6).
Aline and install.
8. Three washers (2) and
Install and tighten.
bolts (1) .
9. Five wires (10) and
InstalI on starter
ground strap (7).
motor (6) according to
figure.
10. Two washers (8) and
Install and tighten.
hex nuts (9).
11. Batteries.
Connect per paragraph 5-37B.
C. OPERATIONAL CHECK.
12. Engine.
Start up (see TM 9-2320-273-10).
Verify that starter motor (6)
engages.
NOTE
Follow-on maintenance action required:
Install left fender, para 11-14B or D.
5-94
