TM 9-2320-273-20
STARTING AND STARTING CONTROL.
5-33. STARTER RELAY MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
4. Five wires (8).
Remove.
5. Two bolts (5), washers
Remove.
(4), and hex nuts (3).
6. Starter relay (9).
Remove.
B.
INSTALLATION.
7. Starter relay (9).
Set relay in place and aline
mounting holes.
8. Two bolts (5), washers
Install and tighten.
(4), and hex nuts (3).
9. Five wires (8).
Connect wires according
to figure.
10. Four washers (7) and
Replace and tighten.
hex nuts (6).
11. Circuit panel cover (2).
Raise into place.
12. Three quarter-turn
Tighten.
screws (1).
13. Batteries.
Connect per paragraph 5-37B.
5-98
