TM 9-2320-273-20
FUEL AND AIR INTAKE SYSTEM.
4-24. AIR CLEANER ELEMENT MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL.
1.
Handle (1) and retainer bar (2). Unscrew handle, slide bar out
of slots and remove.
2.
Outer filter element (3).
Grasp bands on face and pull
out of canister (7).
Do not clean inner element. Do not remove
unless to replace with a new element. This
should be done after the outside filter has
been cleaned five times.
3.
Inner filter element (6).
Remove if necessary, by un-
Rubber seal at opposite end
screwing wing nut (4) and
may stick making removal
removing rubber backed
difficult. Grasp end and work
washer (5).
back and forth to free.
LEGEND:
1.
HANDLE
2. RETAINER BAR
3. OUTER FILTER
ELEMENT
4. WING NUT
5.
RUBBER BACKED
WASHER
6.
INNER FILTER
ELEMENT
7. CANISTER
8. BOOT
TA 074629
4-77
