TM 9-2320-273-20
FUEL AND AIR INTAKE SYSTEM.
4-25. AIR CLEANER ASSEMBLY MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
C. INSTALLATION OF BRACKETS AND FITTINGS (IF REMOVED).
9.
10.
11.
Nipple filter (2).
Install with elbow (5) attached.
Two brackets (14).
Spread and position on air
filter assembly (1).
Two capscrews (12) and two
Install finger tight.
nuts and Iockwashers (13).
D. INSTALLATION OF FILTER ASSEMBLY.
12.
13.
14.
15.
Filter assembly (1).
Place on three studs (8), and
bolt (9), install four lock-
washers (10) and nuts (11).
Air intake pipe (15).
Slide boot (16) over air intake
pipe (15) position and tighten
two clamps (17).
Restriction indicator
Connect flare nut (4) to elbow
tube (3).
(5) and tighten.
Turbo air inlet pipe (7).
Install over filter discharge.
Position and tighten clamps (6).
If brackets are removed it
may be necessary to reposi-
tion them to fit over studs.
Tighten nuts at this time.
4-82
