TM 9-2320-273-20
FUEL AND AIR INTAKE SYSTEM.
4-23. FUEL TANK MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. INSTALLATION.
15. Fuel sender flange (16) with
Install; refer to para 5-79B.
fuel sender attached.
16. Fuel cap {15) with fuel cap
Position on fuel fill neck (25)
gasket (21), fuel cap chain (22), and screw fuel cap (15) on.
and fuel cap retainer (23).
17. Three insulators (29).
Install on three straps (26).
18. Air vent (31).
Screw into fuel tank (27).
19. Three J-brackets (32).
Aline mounting holes to frame
and install with twelve bolts
(2) and nuts (1).
20. Two brackets (11).
Install to two J-brackets (32)
Install to the two forward
with two bolts (12), washers
most J-brackets.
(13), washers (5), and nuts
(6).
21. Two hose clamps (9).
a. Slide over two fuel lines (33).
b. Secure to two brackets (11)
with two bolts (10), washers
(7) and nuts (8).
22. Fuel tank (27).
Raise into position against three
J-brackets (26).
23. Three strap (26) with three
a. Insert three lower T-bolts
insulators (29).
(30) thru bottom of three
J-brackets (32) and secure
with three Iockwashers (4)
and nuts (3).
b. Insert three upper T-bolts
(14) thru top center hole of
three J-brackets (32) and
secure with three lockwash-
ers (4) and nuts (3).
24. Two terminals (17).
Position on fuel sender flange
Install as you marked at
(16) and install with phillips
disassembly.
head screw (19), slotted head
screw (20) and four washers
(18).
25. Two elbows (24).
a. Apply liquid teflon to
threads.
b. Screw into fuel tank (27).
4-72
